pool-cover-3

Solid Pool Cover Fabrics from Ameri-Brand:

Our Solid Vinyl Pool Cover and Solid Vinyl Covers with Safety Mesh Panels are constructed from a Heavy Duty 12 oz. reinforced vinyl. This vinyl is a laminated fabric consisting of 2 layers of fabric with a scrim reinforcement netting between them. This scrim provides exceptional rip & tear resistance. It also contains mold & mildew inhibitors and is built to resist the effects of ultraviolet rays. Available in Green, Blue, & Gray. Solid Vinyl Covers may be ordered with or without a drain panel. If a drain panel is not specifically requested, the cover will be made with out one. Our covers are designed to "tension" over the water and not rest directly on the surface of it. All Ameri-Brand pool covers are sewn with the finest UV protected black thread in the industry! The threading is also embedded (recessed) within the webbing to further protect it from the suns harmful UV rays


Green Solid Covers	Blue Solid Covers	Gray Solid Covers

Mesh Safety Cover Fabrics from Ameri-Brand:

Our Safety Mesh Pool Cover is constructed of 100% Polypropylene. This material has an exceptionally High bursting strength. Being a Mesh Fabric, it allows all the water to drain through into the pool. For Safety, this is the best type of fabric you can use. Available in Green, Dark Blue & Black Safety Mesh.

Our pool covers are designed to "tension" over the water and not rest directly on the surface of it. All Ameri-Brand pool covers are sewn with the finest UV protected black thread in the industry! The threading is also embedded (recessed) within the webbing to further protect it from the suns harmful UV rays .


Green Safety Mesh	Black Safety Mesh	Blue Safety Mesh

There is NO SALES TAX charged on ANY product with the exception of deliveries to California.

Deck Anchors:

Our anchors are made from solid brass and consist of a "barrel" which is secured into the deck and a threaded "pop-up" center insert. The top of the insert has an area directly above the threads that accepts the circular end of the retaining/tensioning springs.

When the pool cover is not in use, the insert is screwed down into the "barrel" with a tool which is provided with your new cover. This leaves the deck totally free of obstructions and tripping hazards. All needed anchors are provided for your cover.

We also have wood deck anchors available.They are slightly higher priced than the standard concrete units.

Tensioning Springs & Covers:

The Spring assemblies are made of Stainless Steel and are sleeved with a heavy duty vinyl to protect both your swimming pool cover and the finish on your deck surface. A specially designed tensioning tool is included with each cover to allow for easy application of the cover and proper tensioning.

Nylon Webbing & Strapping:

Our Nylon Webbing & Strapping is designed to support the entire cover tightly over the pool. With the webbing running both ways on the pool cover, we achieve proper tensioning and it gives the cover a uniform appearance. Rectangular covers require a webbing spacing of 5' apart from one webbing reinforcement to the next. Freeform pool covers require that the runs of webbing be placed at 3' intervals for proper support.

The strapping is secured to the springs with our Heavy Duty Stainless Steel Buckles which lay out flat on the deck. The loose end of the springs is
tensioned over the brass anchors to install the cover.

The webbing itself is a full 1-1/8 inches wide and because we sew it on both the top and the underside of your cover, the webbing thickness becomes a full 3/16 thick! Many companies use a much thinner webbing and only place it on one side of the cover.